18 Months Warranty 550mm Reflex Gauge Glass For Liquid Tower
Working principle:
The glass plate type liquid level gauge is designed based on the
principle of the connecting device. The liquid path composed of the
glass plate and the main body of the liquid level gauge is
connected to the container to be measured through the flange or
taper pipe thread of the connecting pipe to form the communicating
device. The liquid level is the same as the liquid level in the
container, ie the liquid level height.
The needle valves at both ends of the liquid level gauge not only
function as a shut-off valve, but the internal steel ball has the
function of a check valve. When the liquid level gauge accidentally
breaks and leaks, the steel ball can automatically close the liquid
channel under the action of the medium pressure. Prevent large
amounts of liquid from flowing out and play a role in safety
protection. The liquid level gauge can achieve the functions of
anti-corrosion, thermal insulation, anti-frost, and lighting by
changing the material of the parts or adding some auxiliary
components. Widely used in petroleum, chemical industry, electric
power, gold, medicine and other fields
The glass plate type liquid level meter is designed based on the
principle of the communicator. The liquid passage formed by the
glass plate and the liquid level gauge body is connected to the
measured container through a flange or a taper pipe thread to form
a communicator, which is observed through the glass plate. The
liquid level is the same as the liquid level in the container, that
is, the liquid level.
Technical parameters
| Nominal length (center to center ): | 0~300-0~2000mm |
| Recommended length: | 550, 850, 1150, 1450, 1750mm |
| Material: | Carbon steel, 304, 316L |
| Nominal pressure (MPa): | Transparent type: 2.5, 6.3; Reflection-type: 4.0; Sight glass type:
0.1, 0.6 |
| Working temperature: | 0~250℃ |
| Connection flange: | DN20 (3/4”); A,B type---HG20592; C type---HG20615-09 |
| Heating steam cube connector: | RC1/4 internal thread |
| Heating steam pressure: | ≤1.0MPa |
| Steel ball closing pressure: | ≥0.3MPa |
Production Workshop
Certificate
