LPG Storage Magnetic Fuel Tank Level Indicator With 150~6000mm
Center Distance
Product Description
The UHC magnetic liquid level gauge is made up of measuring
body,dual-colored display cylinder, ruler, top&low
flange,magnetic ball and transmitter (4-20mA).Based on buoyance
principle,the magnetic ball in the body of the level gauge is up or
down with the liquid level changing and makes dual-colored turning
to show the level of medium. Each cylinder is with two-color
axisymmetric structures.The distance of two cylinders is 10mm. Red
side of display cylinder indicates liquid and white side display
cylinder indicates air. Besides measuring liquid level,it also
could measure the interface of the two kinds of liquid.
Product Parameters
| Center-center distance: | 150~6000mm |
| Medium density: | More than 0.45g/cm3 |
| Nominal pressure: | PN6~PN63(x 0.1MPa) |
| Material: | SS304, 316L, PP, PTFE, or customized |
| Operating temperature: | <80 °C |
| Process connection: | Flange or customized |
| Indicator types: | |
| A: Al &ABS flap cylinder | B: Al flap plate |
| C: PVC ABS flap cylinder | D: PP&ABS flap cylinder |
| E: AL &LED | F: PP&LED |
| Structure of top chamber: | 1.Welding cover 2.welding cover with M14*1.5 plug screw 3.flange
4.flange with M14*1.5 plug screw 5.welding cover with DN20 flange
6.flange with DN20 flange 7.welding cover with air valve 8.flange
with air valve |
| Structure of bottom chamber: | 1.flange cover 2.flange with drain plug screw 3.flange with DN20
welding tube 4.with DN20 flange 5.with needle/ball valve |
| Protection class: | IP65 |
Product installation
Detailed Images
Magnetic water gauge problem
1. What are the precautions for the magnetic water level gauge?
1. Range (mm) 300~19000
2. Medium density (g/cm3) 0.5~2
3. The medium viscosity is 0.02Pa.S
4. Working temperature: -40~350
5. Pressure rating (MPa) 32
6. Measurement accuracy (mm) 10
7. Explosion-proof grade: ibCT4 (intrinsically safe type), dBT3)
pressure-resistant explosion-proof type))) ).
8. Interface flange: PN4.5 DN25 HG20593 (side fixed type).
PN1.0 DN100 HG20593 (top loading type, bottom loading type) can be
customized according to user needs
2. What is the problem with the magnetic water level gauge?
A common problem with magnetic water level gauges is malfunction.
1. When the actual liquid level rises, the liquid level gauge does
not rise, and there is no response, it is collectively referred to
as "no response after overturning the cabinet or overturning the
cabinet."
2. The scale plate rises as the liquid level rises, and the scale
is displayed in reverse, but there are some that turn the pillar
into red after reversing and not reversing. (If you don't know the
situation here, you can see the principle of the magnetic pressure
gauge));
Magnetic water gauge problem
3. Turn over the board scale and stop at a certain liquid scale.
There are many reasons for the failure of the magnetic water level
gauge. For example, it is not known that the level gauge was
damaged due to field operation errors or initial installation; of
course, there are also cases where the service life expires due to
excessive use time; the parts of the instrument also have quality
problems. According to the safety principle of instrument
installation, generally in important tank areas, each container to
be tested is equipped with two liquid level measuring instruments.
By comparing the measurement data, only one liquid instrument is
installed, so there is no measurement caused by instrument failure.
Errors effectively ensure the safety of production and the accuracy
of measurement. It is possible for customers to install a number of
varieties called magnetic level gauges and install radar level
gauges or differential pressure level gauges on site. The solution
to the problem of the magnetic water level gauge is based on the
actual failure, but when you encounter a failure in use, you can
solve it according to the method of the pick-shaped meter.
